Job Description

Mechanical Engineer- Electronics Packaging> NX CAD

Contract 18 Months M-F 40 hours weekly

Remote to transition on site Covid-19 pending

As a Mechanical Engineer- Electronics Packaging specialist, you will be responsible for developing portions of the lithography system and/or associated tooling related to the electronics infrastructure.

As a Mechanical Engineer- Electronics Packaging Specialist you will:

  • Perform mechanical design and development associated with packaging electronic circuits including, assembly design, analysis, test, and manufacturing introduction support for both new and existing electronics design projects.
  • Understand and mitigate possible failure mechanisms associated with materials, interconnects, and environmental loads to develop a reliable design.
  • Communicate with a team of multi-disciplined engineers (Systems , Electrical, Mechanical, Manufacturing, New Product Logistics, and Product Information Management) for design and logistic release approval.
  • Investigate and edit product structures, generate CAD models, 2D/3D drawings and be responsible for the final technical data package.
  • Create, edit, review, and drive Engineering Changes to closure.
    • Self-Checking and Peer-Checking department designs and change notifications.

 

Education

BS Engineering with a major in any of the following, or equivalent experience:

  • Mechanical Engineering (with Electronics Packaging Experience preferred)
  • Industrial Engineering (taken under advisement based on work experience)

 

Experience

  • 5 to 10 years of Mechanical design & logistics.
  • Ability to design and document all aspects of the electrical infrastructure including:
    • AC, DC, Main power distribution (panel boards, boxes and cabinets).
    • Interconnect cables, bundles and connectors (harnessing).
    • Electronic racks, cabinets, control consoles.
    • Interfacing with printed circuit board designs.
      • Modeling of flex and rigid PWB’s including volumes and critical part locations.
  • Experience designing electronic enclosure assemblies.
  • Experience in sheet metal design.         
  • Experience designing for manufacturability (DFM) and developing assembly work instructions for low to medium volume products.
  • Experience with 3D solid modeling for design conceptualization and realization (preferred experience using NX).
  • Experience supporting design fit check during integration & testing of electrical & electronic systems at the module, sub-system & system level.
  • Knowledgeable of industry codes and standards ( i.e. NEC 70, NFPA 79, Machine Tool Standards).
  • Knowledge of FEA is a plus.
  • Working knowledge of wiring diagrams and schematic diagrams.
  • Working knowledge of design drafting best practices including geometric dimensioning.
  • Perform dimensional and tolerance analysis as needed.
  • Strong written and verbal communication skills required.
  • Ability to write assembly, test procedures, test specifications and test reports.
  • SOFTWARE:
    • 3D CAD - NX preferred (currently using NX11), other 3D CAD programs acceptable.
    • DMS - TeamCenter preferred (currently using TC10), other DMS programs acceptable.
    • Master Data - SAP, other Master Data Management systems acceptable.
  • The position requires highly motivated, extremely organized and self-driven individuals.

 

Personal skills

  • Can observe and respond to people and situations and interact with others encountered in the course of work. 
  • Can learn and apply new information or skills.
  • Must be able to read and interpret data, information, and documents.
  • Strong customer focus and commitment to customer satisfaction through prioritization, quality, efficiency and professionalism.
  • Ability to complete assignments with attention to detail and high degree of accuracy.
  • Proven ability to perform effectively in a demanding environment with changing workloads and deadlines.
  • Result driven-demonstrate ownership and accountability.
  • Identifies bottlenecks and drives improvements.
  • Work independently or as part of a team and follow through on assignments with minimal supervision.
  • Demonstrate open, clear, concise and professional communication.
  • Ability to establish and maintain cooperative working relationships with manager, co-workers and customer.
  • Work according to a strict set of procedures within the provided timelines.
 
Mechanical Engineer- Electronics Packaging> NX CAD

Contract 18 Months M-F 40 hours weekly

Remote to transition on site Covid-19 pending

As a Mechanical Engineer- Electronics Packaging specialist, you will be responsible for developing portions of the lithography system and/or associated tooling related to the electronics infrastructure.

As a Mechanical Engineer- Electronics Packaging Specialist you will:

  • Perform mechanical design and development associated with packaging electronic circuits including, assembly design, analysis, test, and manufacturing introduction support for both new and existing electronics design projects.
  • Understand and mitigate possible failure mechanisms associated with materials, interconnects, and environmental loads to develop a reliable design.
  • Communicate with a team of multi-disciplined engineers (Systems , Electrical, Mechanical, Manufacturing, New Product Logistics, and Product Information Management) for design and logistic release approval.
  • Investigate and edit product structures, generate CAD models, 2D/3D drawings and be responsible for the final technical data package.
  • Create, edit, review, and drive Engineering Changes to closure.
    • Self-Checking and Peer-Checking department designs and change notifications.

 

Education

BS Engineering with a major in any of the following, or equivalent experience:

  • Mechanical Engineering (with Electronics Packaging Experience preferred)
  • Industrial Engineering (taken under advisement based on work experience)

 

Experience

  • 5 to 10 years of Mechanical design & logistics.
  • Ability to design and document all aspects of the electrical infrastructure including:
    • AC, DC, Main power distribution (panel boards, boxes and cabinets).
    • Interconnect cables, bundles and connectors (harnessing).
    • Electronic racks, cabinets, control consoles.
    • Interfacing with printed circuit board designs.
      • Modeling of flex and rigid PWB’s including volumes and critical part locations.
  • Experience designing electronic enclosure assemblies.
  • Experience in sheet metal design.         
  • Experience designing for manufacturability (DFM) and developing assembly work instructions for low to medium volume products.
  • Experience with 3D solid modeling for design conceptualization and realization (preferred experience using NX).
  • Experience supporting design fit check during integration & testing of electrical & electronic systems at the module, sub-system & system level.
  • Knowledgeable of industry codes and standards ( i.e. NEC 70, NFPA 79, Machine Tool Standards).
  • Knowledge of FEA is a plus.
  • Working knowledge of wiring diagrams and schematic diagrams.
  • Working knowledge of design drafting best practices including geometric dimensioning.
  • Perform dimensional and tolerance analysis as needed.
  • Strong written and verbal communication skills required.
  • Ability to write assembly, test procedures, test specifications and test reports.
  • SOFTWARE:
    • 3D CAD - NX preferred (currently using NX11), other 3D CAD programs acceptable.
    • DMS - TeamCenter preferred (currently using TC10), other DMS programs acceptable.
    • Master Data - SAP, other Master Data Management systems acceptable.
  • The position requires highly motivated, extremely organized and self-driven individuals.

 

Personal skills

  • Can observe and respond to people and situations and interact with others encountered in the course of work. 
  • Can learn and apply new information or skills.
  • Must be able to read and interpret data, information, and documents.
  • Strong customer focus and commitment to customer satisfaction through prioritization, quality, efficiency and professionalism.
  • Ability to complete assignments with attention to detail and high degree of accuracy.
  • Proven ability to perform effectively in a demanding environment with changing workloads and deadlines.
  • Result driven-demonstrate ownership and accountability.
  • Identifies bottlenecks and drives improvements.
  • Work independently or as part of a team and follow through on assignments with minimal supervision.
  • Demonstrate open, clear, concise and professional communication.
  • Ability to establish and maintain cooperative working relationships with manager, co-workers and customer.
  • Work according to a strict set of procedures within the provided timelines.
 

Application Instructions

Please click on the link below to apply for this position. A new window will open and direct you to apply at our corporate careers page. We look forward to hearing from you!

Apply Online